+44(0)1438 900180
info@tidey.org.uk
Commercial
“Approved NICEIC Installer with over 35 years of experience”.
Commercial
Industrial
Domestic
What services do we offer?
Distribution Board
Changes
Distribution board Changes
Looking for a new distribution board for your house, office or industrial facility. We can design, install and commission a new consumer unit or distribution board to the latest BS7671 wiring regulations. Our company are a fully-fledged member of the NICEIC approved scheme since 1985 and are fully Part P compliant. Every installation will receive an Electrical Installation Certificate upon completion.
Our registered electricians can install, extend, and adapt all parts of your electrical systems, including circuit breakers, circuit boards, earthing points, bonding to consumer services, during the consumer unit upgrades.
Why would I upgrade?
Increase electrical capacity
As we’re using more and more electrical devices and appliances, it increases the demand on the electrical system. A new consumer unit can handle a higher load, preventing overloads and potential power outages.
Improve electrical reliability
A new consumer unit can reduce the likelihood of electrical faults and provide more consistent performance. Older units may have worn-out components that are prone to failure, while new units are more robust and reliable.
Meet latest regulations
While older fuse boxes aren’t illegal to have, they can no longer be fitted as they don’t meet the latest electrical safety and asbestos regulations.
Problems with an existing Consumer Unit or Distribution Board?
Speak to our team on 01438900180 and we can come out to survey the issue and discuss alteration and remedial works.
Wiring
Wiring
Looking to add one or many additional circuits to your current or new installation?
If so, get in touch with our team and we can have a look at your requirements.
- Our team are experienced and fully JIB trained.
- Armoured cabling
- H07R Cabling
- Twin + E
- Singles in trunking and conduit.
Containment
Containment
Our team of engineers are fully trained in installing PVC and metal containment systems, with extensive experience
- Galvanized, black enamel and PVC conduit.
- PVC & Metal trunking.
- Metal tray (light, medium & heavy duty).
- Ladder rack systems.
- 2/3 compartment Skirting & Dado trunking (PVC & Metal)
Lighting
Lighting
Whether you’re looking to adapt, extend or add new lighting to your electrical system our team can assist. We have experience in conventional lighting and more advanced dimming methods like DALI.
Whatever the nature of your business – large or small, retail, office or warehouse, modern commercial lighting solutions can go a long way to helping you transform your workspace.
The right cost-effective lighting design and installation can create a welcoming environment, showcasing your products and services. It can also enlarge the look of your space, improve security and even save you money.
Whether you’re looking to upgrade or repair your existing lighting, or planning a complete renovation of your commercial space, it’s worth taking the time to consider the right lighting for your space and your business needs.
Why Change you’re lighting?
- Maximise Energy Efficiency
- Create Maximum Impact
- Transform your workspace
- Improve security.
Types of lighting
- One way, 2 way and intermediate switching
- Daylight Harvesting
- DALI Dimming
- 1-10v Diming
- Lighting Control
Emergency Light
Testing
Emergency Light Testing
Looking for a company to carry out an emergency lighting inspection, speak to our team on 01438900180 or email info@tidey.org.uk to talk through your requirements.
Our team are trained to BS5266 -2 Emergency lighting regulations and have vast experience in designing, installing and maintaining emergency lighting systems through-out the UK.
Types of systems
- Escape Route Lighting
- Maintained and non-maintained systems
- Central battery supplied luminaire systems
- Automatic test systems
EICR
Testing
EICR Testing Electrical Installation Condition Report
Our registered electricians can carry out a periodic (EICR) inspection on your electrical system and issue an EICR report of the remedial actions needed.
We are a fully-fledged member of the NICEIC approved contractor scheme.
All our testing procedures are in line with Guidance Note 3, Electrical Best Practice Guide and BS7671 wiring regulations.
The report breaks down the remedial actions needed into C1, C2 & C3 actions. Please see the electrical safety council’s website for more details on this. https://www.electricalsafetyfirst.org.uk/media/1626/best-practice-guide-4.pdf
Our team use Meggar Certsuite software for our detailed EICR reports, this allows us to take pictures of any remedial actions so there is no ambiguity, and the customer will see a clear picture of the electrical installation.
Working Out of hours
We understand that you may not be able to turn certain circuits off during work hours. Our team offer an out of hours service to cover this issue.
- EICR Testing
- PAT Testing
Got a problem with an existing circuit and need it testing?
Give our team a call on 01438900180 and we will get an engineer out to look at your requirements.
Submain
Upgrades
Submain panels
We can upgrade your existing sub-main if it is not running as efficiently as it should be.
We can also install new sub-main panels to allow for extra power if the main panel is full. These sub-mains also ensure that an even distribution of power is given throughout the property.
We offer designs that can withstand different environments (inside or outside). A load calculation is produced to get a better understanding of the power supply and the requirements.
Periodic checks and inspections will determine if your system is safe, running efficiently and conforms to regulations.
UPS
Systems
UPS systems
A UPS works by constantly monitoring the voltage it is receiving from the mains supply. When the supply voltage is unsuitable or lost, the UPS will automatically switch to battery power. The UPS ensures that your devices and equipment are protected from other power issues such as electrical surges, sags and spikes.
We offer:
- Partial UPS systems
- Full Building UPS systems
- Comms Rack single and three phase solutions.
- Static switch and parallel feed systems.
- Solar integrated systems.
EV
Charging
EV Chargers
Are you looking at transitioning to an electric vehicle or do you simply need charging points for your customers and staff? We offer a range of domestic and commercial EV charging solutions perfect for your business. If you’re not quite sure what chargers you need our team can assess your needs and advise you. Our team can provide you with an end-to-end service making your transition over to electric as easy as possible.
Brands of Chargers we’ve used.
- My Energi
- Tesla
- Hypervolt
- Garo
Looking to add solar?
Check our Solar Page here and enjoy the benefits of having a fully integrated system! here
Case Studies
Building 84
Laboratory Installation
Building 84
Scope of Works
Celltarga Building contractors were tasked with refitting a new set of laboratory rooms at Building 84 for OPSS this included installing new ceilings and wall coverings through out.
Electrical
- Our works included installing services baskets running through each lab for Electrical, Data, Fire Alarm and controls cabling.
- Modernising the existing lighting system to a modular METWAY solution, to enable maintenance to service the light without having to isolate the whole circuit.
- New Emergency lighting in accordance with BS5266-2 and upgrading existing way finding to self-test type system.
- Containment through out labs included MK PVC 3 compartment dado trunking, 25mm metal galvanised conduit to access control points and PVC conduit for specialised labs.
Data Works
- Excel Cat6a data cabling throughout floors.
- Comms room upgrade to 3 x 42U comms cabinets complete with UPS backup and comms patching schedule.
VISA
Data Centre Installation
VISA
Scope of works
Tidey Electrical Ltd was enlisted as a subcontractor to JCA for the VISA Europe data centre, to oversee the main data hall requirements.
Works included:
- Armoured supplies from submain to UPS, ATS and Chiller locations.
- 300 + H07R supplies to comms cabinet locations through-out site.
- ATS change over connections.
- Ladder rack containment throughout for 125mm and 240mm armoured’s.
Strathmore School
Lighting Upgrades
Strathmore School
Lighting Upgrades
Strathmore School reached out to Tidey Electrical ltd help with upgrading the existing lighting scheme throughout site from compact fluorescents to new LED JCC light fittings.
Works included:
- Design and verification of existing emergency lighting scheme to fit new requirements.
- Full replacement of existing lighting throughout site to LED energy efficient alternative.
- Full EIC testing of new lighting to comply with BS7671 regulations.
ACCREDITATIONS
Our latest reviews
Tidey Electrical Ltd has provided power and data cable infrastructure installations for a number of Government IT systems, across several Governmental departments…
STEPHEN B
UK Government Department
★★★★★
I have worked with Tidey Electrical on a number of complex power & data installation projects and found their approach extremely professional and dedicated…
STEVE
Stelor Consulting
★★★★★
We have worked with Tidey electrical for a number of years and they are always a pleasure to deal with. They have a can do attitude are committed to the job and the…
SAM NEWMAN
OgeliT
★★★★★
I have worked closely with Tom Tidey over several years and multiple projects. Tom and his team are very professional and very helpful. We constantly worked together…
MR SPARKS
Virgin Media Business
★★★★★
I have known Tom for many years as we have worked together on various cabling projects. Tom’s standard of work was always of the highest quality and he was rightly…
VIJAY JOSHI
Computacentre
★★★★★